cisco.ise.network_access_global_exception_rules module – Resource module for Network Access Global Exception Rules

Note

This module is part of the cisco.ise collection (version 2.5.4).

To install it, use: ansible-galaxy collection install cisco.ise. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.ise.network_access_global_exception_rules.

New in cisco.ise 1.0.0

Synopsis
Requirements
Parameters
Notes
See Also
Examples
Return Values

Synopsis 

Manage operations create, update and delete of the resource Network Access Global Exception Rules.
Network Access - Create global exception authorization rule.
Network Access - Delete global exception authorization rule.
Network Access - Update global exception authorization rule.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ciscoisesdk >= 2.0.3
python >= 3.5

Parameters 

Parameter	Comments
id string	Id path parameter. Rule id.
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: false ← (default) true
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in cisco.ise 1.1.0	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: false true ← (default)
ise_uses_csrf_token boolean added in cisco.ise 3.0.0	Flag that informs the SDK whether we send the CSRF token to ISE’s ERS APIs. If it is True, the SDK assumes that your ISE CSRF Check is enabled. If it is True, it assumes you need the SDK to manage the CSRF token automatically for you. Choices: false ← (default) true
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: false true ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: “3.1_Patch_1”
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: false true ← (default)
link dictionary	Network Access Global Exception Rules’s link.
href string	Network Access Global Exception Rules’s href.
rel string	Network Access Global Exception Rules’s rel.
type string	Network Access Global Exception Rules’s type.
profile list / elements=string	The authorization profile/s.
rule dictionary	Common attributes in rule authentication/authorization.
condition dictionary	Network Access Global Exception Rules’s condition.
attributeName string	Dictionary attribute name.
attributeValue string	<ul><li>Attribute value for condition</li> <li>Value type is specified in dictionary object</li> <li>if multiple values allowed is specified in dictionary object</li></ul>.
children list / elements=dictionary	In case type is andBlock or orBlock addtional conditions will be aggregated under this logical (OR/AND) condition.
conditionType string	<ul><li>Inidicates whether the record is the condition itself(data) or a logical(or,and) aggregation</li> <li>Data type enum(reference,single) indicates than “conditonId” OR “ConditionAttrs” fields should contain condition data but not both</li> <li>Logical aggreation(and,or) enum indicates that additional conditions are present under the children field</li></ul>.
isNegate boolean	Indicates whereas this condition is in negate mode. Choices: false true
link dictionary	Network Access Global Exception Rules’s link.
href string	Network Access Global Exception Rules’s href.
rel string	Network Access Global Exception Rules’s rel.
type string	Network Access Global Exception Rules’s type.
conditionType string	<ul><li>Inidicates whether the record is the condition itself(data) or a logical(or,and) aggregation</li> <li>Data type enum(reference,single) indicates than “conditonId” OR “ConditionAttrs” fields should contain condition data but not both</li> <li>Logical aggreation(and,or) enum indicates that additional conditions are present under the children field</li></ul>.
datesRange dictionary	<p>Defines for which date/s TimeAndDate condition will be matched<br> Options are - Date range, for specific date, the same date should be used for start/end date <br> Default - no specific dates<br> In order to reset the dates to have no specific dates Date format - yyyy-mm-dd (MM = month, dd = day, yyyy = year)</p>.
endDate string	Network Access Global Exception Rules’s endDate.
startDate string	Network Access Global Exception Rules’s startDate.
datesRangeException dictionary	<p>Defines for which date/s TimeAndDate condition will be matched<br> Options are - Date range, for specific date, the same date should be used for start/end date <br> Default - no specific dates<br> In order to reset the dates to have no specific dates Date format - yyyy-mm-dd (MM = month, dd = day, yyyy = year)</p>.
endDate string	Network Access Global Exception Rules’s endDate.
startDate string	Network Access Global Exception Rules’s startDate.
description string	Condition description.
dictionaryName string	Dictionary name.
dictionaryValue string	Dictionary value.
hoursRange dictionary	<p>Defines for which hours a TimeAndDate condition will be matched<br> Time format - hh mm ( h = hour , mm = minutes ) <br> Default - All Day </p>.
endTime string	Network Access Global Exception Rules’s endTime.
startTime string	Network Access Global Exception Rules’s startTime.
hoursRangeException dictionary	<p>Defines for which hours a TimeAndDate condition will be matched<br> Time format - hh mm ( h = hour , mm = minutes ) <br> Default - All Day </p>.
endTime string	Network Access Global Exception Rules’s endTime.
startTime string	Network Access Global Exception Rules’s startTime.
id string	Network Access Global Exception Rules’s id.
isNegate boolean	Indicates whereas this condition is in negate mode. Choices: false true
link dictionary	Network Access Global Exception Rules’s link.
href string	Network Access Global Exception Rules’s href.
rel string	Network Access Global Exception Rules’s rel.
type string	Network Access Global Exception Rules’s type.
name string	Condition name.
operator string	Equality operator.
weekDays list / elements=string	<p>Defines for which days this condition will be matched<br> Days format - Arrays of WeekDay enums <br> Default - List of All week days</p>.
weekDaysException list / elements=string	<p>Defines for which days this condition will NOT be matched<br> Days format - Arrays of WeekDay enums <br> Default - Not enabled</p>.
default boolean	Indicates if this rule is the default one. Choices: false true
hitCounts integer	The amount of times the rule was matched.
id string	The identifier of the rule.
name string	Rule name, Valid characters are alphanumerics, underscore, hyphen, space, period, parentheses.
rank integer	The rank(priority) in relation to other rules. Lower rank is higher priority.
state string	The state that the rule is in. A disabled rule cannot be matched.
securityGroup string	Security group used in authorization policies.

Notes 

Note

SDK Method used are network_access_authorization_global_exception_rules.NetworkAccessAuthorizationGlobalExceptionRules.create_network_access_policy_set_global_exception_rule, network_access_authorization_global_exception_rules.NetworkAccessAuthorizationGlobalExceptionRules.delete_network_access_policy_set_global_exception_rule_by_id, network_access_authorization_global_exception_rules.NetworkAccessAuthorizationGlobalExceptionRules.update_network_access_policy_set_global_exception_rule_by_id,
Paths used are post /network-access/policy-set/global-exception, delete /network-access/policy-set/global-exception/{id}, put /network-access/policy-set/global-exception/{id},
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK
The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection

Examples 

- name: Create
  cisco.ise.network_access_global_exception_rules:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    link:
      href: string
      rel: string
      type: string
    profile:
    - string
    rule:
      condition:
        attributeName: string
        attributeValue: string
        children:
        - conditionType: string
          isNegate: true
          link:
            href: string
            rel: string
            type: string
        conditionType: string
        datesRange:
          endDate: string
          startDate: string
        datesRangeException:
          endDate: string
          startDate: string
        description: string
        dictionaryName: string
        dictionaryValue: string
        hoursRange:
          endTime: string
          startTime: string
        hoursRangeException:
          endTime: string
          startTime: string
        id: string
        isNegate: true
        link:
          href: string
          rel: string
          type: string
        name: string
        operator: string
        weekDays:
        - string
        weekDaysException:
        - string
      default: true
      hitCounts: 0
      id: string
      name: string
      rank: 0
      state: string
    securityGroup: string

- name: Update by id
  cisco.ise.network_access_global_exception_rules:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    id: string
    link:
      href: string
      rel: string
      type: string
    profile:
    - string
    rule:
      condition:
        attributeName: string
        attributeValue: string
        children:
        - conditionType: string
          isNegate: true
          link:
            href: string
            rel: string
            type: string
        conditionType: string
        datesRange:
          endDate: string
          startDate: string
        datesRangeException:
          endDate: string
          startDate: string
        description: string
        dictionaryName: string
        dictionaryValue: string
        hoursRange:
          endTime: string
          startTime: string
        hoursRangeException:
          endTime: string
          startTime: string
        id: string
        isNegate: true
        link:
          href: string
          rel: string
          type: string
        name: string
        operator: string
        weekDays:
        - string
        weekDaysException:
        - string
      default: true
      hitCounts: 0
      id: string
      name: string
      rank: 0
      state: string
    securityGroup: string

- name: Delete by id
  cisco.ise.network_access_global_exception_rules:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    id: string

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key

Description

ise_response

dictionary

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: {“link”: {“href”: “string”, “rel”: “string”, “type”: “string”}, “profile”: [“string”], “rule”: {“condition”: {“attributeName”: “string”, “attributeValue”: “string”, “children”: [{“conditionType”: “string”, “isNegate”: true, “link”: {“href”: “string”, “rel”: “string”, “type”: “string”}}], “conditionType”: “string”, “datesRange”: {“endDate”: “string”, “startDate”: “string”}, “datesRangeException”: {“endDate”: “string”, “startDate”: “string”}, “description”: “string”, “dictionaryName”: “string”, “dictionaryValue”: “string”, “hoursRange”: {“endTime”: “string”, “startTime”: “string”}, “hoursRangeException”: {“endTime”: “string”, “startTime”: “string”}, “id”: “string”, “isNegate”: true, “link”: {“href”: “string”, “rel”: “string”, “type”: “string”}, “name”: “string”, “operator”: “string”, “weekDays”: [“string”], “weekDaysException”: [“string”]}, “default”: true, “hitCounts”: 0, “id”: “string”, “name”: “string”, “rank”: 0, “state”: “string”}, “securityGroup”: “string”}

ise_update_response

dictionary

added in cisco.ise 1.1.0

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: {“response”: {“link”: {“href”: “string”, “rel”: “string”, “type”: “string”}, “profile”: [“string”], “rule”: {“condition”: {“attributeName”: “string”, “attributeValue”: “string”, “children”: [{“conditionType”: “string”, “isNegate”: true, “link”: {“href”: “string”, “rel”: “string”, “type”: “string”}}], “conditionType”: “string”, “datesRange”: {“endDate”: “string”, “startDate”: “string”}, “datesRangeException”: {“endDate”: “string”, “startDate”: “string”}, “description”: “string”, “dictionaryName”: “string”, “dictionaryValue”: “string”, “hoursRange”: {“endTime”: “string”, “startTime”: “string”}, “hoursRangeException”: {“endTime”: “string”, “startTime”: “string”}, “id”: “string”, “isNegate”: true, “link”: {“href”: “string”, “rel”: “string”, “type”: “string”}, “name”: “string”, “operator”: “string”, “weekDays”: [“string”], “weekDaysException”: [“string”]}, “default”: true, “hitCounts”: 0, “id”: “string”, “name”: “string”, “rank”: 0, “state”: “string”}, “securityGroup”: “string”}, “version”: “string”}

Authors

Rafael Campos (@racampos)

Collection links

Issue Tracker Repository (Sources)

cisco.ise.network_access_global_exception_rules module – Resource module for Network Access Global Exception Rules

Synopsis

Requirements

Parameters

Notes

See Also

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

See Also 

Examples 

Return Values 