cisco.ise.network_device module – Resource module for Network Device

Note

This module is part of the cisco.ise collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ise.

To use it in a playbook, specify: cisco.ise.network_device.

New in version 1.0.0: of cisco.ise

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis 

Manage operations create, update and delete of the resource Network Device.
This API creates a network device.
This API deletes a network device by ID.
This API deletes a network device by name.
This API allows the client to update a network device by ID.
This API allows the client to update a network device by name.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ciscoisesdk >= 2.0.3
python >= 3.5

Parameters 

Parameter	Comments
authenticationSettings dictionary	Network Device’s authenticationSettings.
dtlsRequired boolean	This value enforces use of dtls. Choices: no yes
enabled boolean	Enabled flag. Choices: no yes
enableKeyWrap boolean	EnableKeyWrap flag. Choices: no yes
enableMultiSecret string	Network Device’s enableMultiSecret.
keyEncryptionKey string	Network Device’s keyEncryptionKey.
keyInputFormat string	Allowed values - ASCII, - HEXADECIMAL.
messageAuthenticatorCodeKey string	Network Device’s messageAuthenticatorCodeKey.
networkProtocol string	Allowed values - RADIUS, - TACACS_PLUS.
radiusSharedSecret string	Network Device’s radiusSharedSecret.
secondRADIUSSharedSecret string	Network Device’s secondRADIUSSharedSecret.
coaPort integer	Network Device’s coaPort.
description string	Network Device’s description.
dtlsDnsName string	This value is used to verify the client identity contained in the X.509 RADIUS/DTLS client certificate.
id string	Network Device’s id.
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: no ← (default) yes
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in 1.1.0 of cisco.ise	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: no yes ← (default)
ise_uses_csrf_token boolean added in 3.0.0 of cisco.ise	Flag that informs the SDK whether we send the CSRF token to ISE’s ERS APIs. If it is True, the SDK assumes that your ISE CSRF Check is enabled. If it is True, it assumes you need the SDK to manage the CSRF token automatically for you. Choices: no ← (default) yes
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: no yes ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: “3.1_Patch_1”
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: no yes ← (default)
modelName string	Network Device’s modelName.
name string	Network Device’s name.
NetworkDeviceGroupList list / elements=string	List of Network Device Group names for this node.
NetworkDeviceIPList list / elements=dictionary	List of IP Subnets for this node.
getIpaddressExclude string	It can be either single IP address or IP range address.
ipaddress string	Network Device’s ipaddress.
mask integer	Network Device’s mask.
profileName string	Network Device’s profileName.
snmpsettings dictionary	Network Device’s snmpsettings.
linkTrapQuery boolean	LinkTrapQuery flag. Choices: no yes
macTrapQuery boolean	MacTrapQuery flag. Choices: no yes
originatingPolicyServicesNode string	Network Device’s originatingPolicyServicesNode.
pollingInterval integer	Network Device’s pollingInterval.
roCommunity string	Network Device’s roCommunity.
version string	Network Device’s version.
softwareVersion string	Network Device’s softwareVersion.
tacacsSettings dictionary	Network Device’s tacacsSettings.
connectModeOptions string	Allowed values - OFF, - ON_LEGACY, - ON_DRAFT_COMPLIANT.
sharedSecret string	Network Device’s sharedSecret.
trustsecsettings dictionary	Network Device’s trustsecsettings.
deviceAuthenticationSettings dictionary	Network Device’s deviceAuthenticationSettings.
sgaDeviceId string	Network Device’s sgaDeviceId.
sgaDevicePassword string	Network Device’s sgaDevicePassword.
deviceConfigurationDeployment dictionary	Network Device’s deviceConfigurationDeployment.
enableModePassword string	Network Device’s enableModePassword.
execModePassword string	Network Device’s execModePassword.
execModeUsername string	Network Device’s execModeUsername.
includeWhenDeployingSGTUpdates boolean	IncludeWhenDeployingSGTUpdates flag. Choices: no yes
pushIdSupport boolean	PushIdSupport flag. Choices: no yes
sgaNotificationAndUpdates dictionary	Network Device’s sgaNotificationAndUpdates.
coaSourceHost string	Network Device’s coaSourceHost.
downlaodEnvironmentDataEveryXSeconds integer	Network Device’s downlaodEnvironmentDataEveryXSeconds.
downlaodPeerAuthorizationPolicyEveryXSeconds integer	Network Device’s downlaodPeerAuthorizationPolicyEveryXSeconds.
downloadSGACLListsEveryXSeconds integer	Network Device’s downloadSGACLListsEveryXSeconds.
otherSGADevicesToTrustThisDevice boolean	OtherSGADevicesToTrustThisDevice flag. Choices: no yes
reAuthenticationEveryXSeconds integer	Network Device’s reAuthenticationEveryXSeconds.
sendConfigurationToDevice boolean	SendConfigurationToDevice flag. Choices: no yes
sendConfigurationToDeviceUsing string	Allowed values - ENABLE_USING_COA, - ENABLE_USING_CLI, - DISABLE_ALL.

Notes 

Note

SDK Method used are network_device.NetworkDevice.create_network_device, network_device.NetworkDevice.delete_network_device_by_id, network_device.NetworkDevice.delete_network_device_by_name, network_device.NetworkDevice.update_network_device_by_id, network_device.NetworkDevice.update_network_device_by_name,
Paths used are post /ers/config/networkdevice, delete /ers/config/networkdevice/name/{name}, delete /ers/config/networkdevice/{id}, put /ers/config/networkdevice/name/{name}, put /ers/config/networkdevice/{id},
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK
The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection

Examples 

- name: Update by name
  cisco.ise.network_device:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    NetworkDeviceGroupList:
    - string
    NetworkDeviceIPList:
    - getIpaddressExclude: string
      ipaddress: string
      mask: 0
    authenticationSettings:
      dtlsRequired: true
      enableKeyWrap: true
      enableMultiSecret: string
      enabled: true
      keyEncryptionKey: string
      keyInputFormat: string
      messageAuthenticatorCodeKey: string
      networkProtocol: string
      radiusSharedSecret: string
      secondRadiusSharedSecret: string
    coaPort: 0
    description: string
    dtlsDnsName: string
    id: string
    modelName: string
    name: string
    profileName: string
    snmpsettings:
      linkTrapQuery: true
      macTrapQuery: true
      originatingPolicyServicesNode: string
      pollingInterval: 0
      roCommunity: string
      version: string
    softwareVersion: string
    tacacsSettings:
      connectModeOptions: string
      sharedSecret: string
    trustsecsettings:
      deviceAuthenticationSettings:
        sgaDeviceId: string
        sgaDevicePassword: string
      deviceConfigurationDeployment:
        enableModePassword: string
        execModePassword: string
        execModeUsername: string
        includeWhenDeployingSGTUpdates: true
      pushIdSupport: true
      sgaNotificationAndUpdates:
        coaSourceHost: string
        downlaodEnvironmentDataEveryXSeconds: 0
        downlaodPeerAuthorizationPolicyEveryXSeconds: 0
        downloadSGACLListsEveryXSeconds: 0
        otherSGADevicesToTrustThisDevice: true
        reAuthenticationEveryXSeconds: 0
        sendConfigurationToDevice: true
        sendConfigurationToDeviceUsing: string

- name: Delete by name
  cisco.ise.network_device:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    name: string

- name: Update by id
  cisco.ise.network_device:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    NetworkDeviceGroupList:
    - string
    NetworkDeviceIPList:
    - getIpaddressExclude: string
      ipaddress: string
      mask: 0
    authenticationSettings:
      dtlsRequired: true
      enableKeyWrap: true
      enableMultiSecret: string
      enabled: true
      keyEncryptionKey: string
      keyInputFormat: string
      messageAuthenticatorCodeKey: string
      networkProtocol: string
      radiusSharedSecret: string
      secondRadiusSharedSecret: string
    coaPort: 0
    description: string
    dtlsDnsName: string
    id: string
    modelName: string
    name: string
    profileName: string
    snmpsettings:
      linkTrapQuery: true
      macTrapQuery: true
      originatingPolicyServicesNode: string
      pollingInterval: 0
      roCommunity: string
      version: string
    softwareVersion: string
    tacacsSettings:
      connectModeOptions: string
      sharedSecret: string
    trustsecsettings:
      deviceAuthenticationSettings:
        sgaDeviceId: string
        sgaDevicePassword: string
      deviceConfigurationDeployment:
        enableModePassword: string
        execModePassword: string
        execModeUsername: string
        includeWhenDeployingSGTUpdates: true
      pushIdSupport: true
      sgaNotificationAndUpdates:
        coaSourceHost: string
        downlaodEnvironmentDataEveryXSeconds: 0
        downlaodPeerAuthorizationPolicyEveryXSeconds: 0
        downloadSGACLListsEveryXSeconds: 0
        otherSGADevicesToTrustThisDevice: true
        reAuthenticationEveryXSeconds: 0
        sendConfigurationToDevice: true
        sendConfigurationToDeviceUsing: string

- name: Delete by id
  cisco.ise.network_device:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    id: string

- name: Create
  cisco.ise.network_device:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    NetworkDeviceGroupList:
    - string
    NetworkDeviceIPList:
    - getIpaddressExclude: string
      ipaddress: string
      mask: 0
    authenticationSettings:
      dtlsRequired: true
      enableKeyWrap: true
      enableMultiSecret: string
      enabled: true
      keyEncryptionKey: string
      keyInputFormat: string
      messageAuthenticatorCodeKey: string
      networkProtocol: string
      radiusSharedSecret: string
      secondRadiusSharedSecret: string
    coaPort: 0
    description: string
    dtlsDnsName: string
    modelName: string
    name: string
    profileName: string
    snmpsettings:
      linkTrapQuery: true
      macTrapQuery: true
      originatingPolicyServicesNode: string
      pollingInterval: 0
      roCommunity: string
      version: string
    softwareVersion: string
    tacacsSettings:
      connectModeOptions: string
      sharedSecret: string
    trustsecsettings:
      deviceAuthenticationSettings:
        sgaDeviceId: string
        sgaDevicePassword: string
      deviceConfigurationDeployment:
        enableModePassword: string
        execModePassword: string
        execModeUsername: string
        includeWhenDeployingSGTUpdates: true
      pushIdSupport: true
      sgaNotificationAndUpdates:
        coaSourceHost: string
        downlaodEnvironmentDataEveryXSeconds: 0
        downlaodPeerAuthorizationPolicyEveryXSeconds: 0
        downloadSGACLListsEveryXSeconds: 0
        otherSGADevicesToTrustThisDevice: true
        reAuthenticationEveryXSeconds: 0
        sendConfigurationToDevice: true
        sendConfigurationToDeviceUsing: string

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key

Description

ise_response

dictionary

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: “{\n \”id\”: \”string\”,\n \”name\”: \”string\”,\n \”description\”: \”string\”,\n \”authenticationSettings\”: {\n \”networkProtocol\”: \”string\”,\n \”secondRadiusSharedSecret\”: \”string\”,\n \”radiusSharedSecret\”: \”string\”,\n \”enableKeyWrap\”: true,\n \”enabled\”: true,\n \”dtlsRequired\”: true,\n \”enableMultiSecret\”: \”string\”,\n \”keyEncryptionKey\”: \”string\”,\n \”messageAuthenticatorCodeKey\”: \”string\”,\n \”keyInputFormat\”: \”string\”\n },\n \”snmpsettings\”: {\n \”version\”: \”string\”,\n \”roCommunity\”: \”string\”,\n \”pollingInterval\”: 0,\n \”linkTrapQuery\”: true,\n \”macTrapQuery\”: true,\n \”originatingPolicyServicesNode\”: \”string\”\n },\n \”trustsecsettings\”: {\n \”deviceAuthenticationSettings\”: {\n \”sgaDeviceId\”: \”string\”,\n \”sgaDevicePassword\”: \”string\”\n },\n \”sgaNotificationAndUpdates\”: {\n \”downlaodEnvironmentDataEveryXSeconds\”: 0,\n \”downlaodPeerAuthorizationPolicyEveryXSeconds\”: 0,\n \”reAuthenticationEveryXSeconds\”: 0,\n \”downloadSGACLListsEveryXSeconds\”: 0,\n \”otherSGADevicesToTrustThisDevice\”: true,\n \”sendConfigurationToDevice\”: true,\n \”sendConfigurationToDeviceUsing\”: \”string\”,\n \”coaSourceHost\”: \”string\”\n },\n \”deviceConfigurationDeployment\”: {\n \”includeWhenDeployingSGTUpdates\”: true,\n \”enableModePassword\”: \”string\”,\n \”execModePassword\”: \”string\”,\n \”execModeUsername\”: \”string\”\n },\n \”pushIdSupport\”: true\n },\n \”tacacsSettings\”: {\n \”sharedSecret\”: \”string\”,\n \”connectModeOptions\”: \”string\”\n },\n \”profileName\”: \”string\”,\n \”coaPort\”: 0,\n \”dtlsDnsName\”: \”string\”,\n \”modelName\”: \”string\”,\n \”softwareVersion\”: \”string\”,\n \”NetworkDeviceIPList\”: [\n {\n \”ipaddress\”: \”string\”,\n \”mask\”: 0,\n \”getIpaddressExclude\”: \”string\”\n }\n ],\n \”NetworkDeviceGroupList\”: [\n \”string\”\n ],\n \”link\”: {\n \”rel\”: \”string\”,\n \”href\”: \”string\”,\n \”type\”: \”string\”\n }\n}\n”

ise_update_response

dictionary

added in 1.1.0 of cisco.ise

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: “{\n \”UpdatedFieldsList\”: {\n \”updatedField\”: [\n {\n \”field\”: \”string\”,\n \”oldValue\”: \”string\”,\n \”newValue\”: \”string\”\n }\n ],\n \”field\”: \”string\”,\n \”oldValue\”: \”string\”,\n \”newValue\”: \”string\”\n }\n}\n”

Authors

Rafael Campos (@racampos)

Collection links

Issue Tracker Repository (Sources)

cisco.ise.network_device module – Resource module for Network Device

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 