cisco.ise.network_access_network_condition module – Resource module for Network Access Network Condition

Note

This module is part of the cisco.ise collection (version 2.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ise.

To use it in a playbook, specify: cisco.ise.network_access_network_condition.

New in version 1.0.0: of cisco.ise

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis 

Manage operations create, update and delete of the resource Network Access Network Condition.
Network Access - Creates network condition.
Network Access - Delete network condition.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ciscoisesdk >= 1.4.0
python >= 3.5

Parameters 

Parameter	Comments
conditions list / elements=string	Network Access Network Condition’s conditions.
cliDnisList list / elements=string	<p>This field should contain a Caller ID (CLI), comma, and Called ID (DNIS).<br> Line format - Caller ID (CLI), Called ID (DNIS)</p>.
conditionType string	This field determines the content of the conditions field.
description string	Network Access Network Condition’s description.
deviceGroupList list / elements=string	<p>This field should contain a tuple with NDG Root, comma, and an NDG (that it under the root).<br> Line format - NDG Root Name, NDG, Port</p>.
deviceList list / elements=string	<p>This field should contain Device-Name,port-number. The device name must be the same as the name field in a Network Device object.<br> Line format - Device Name,Port</p>.
id string	Network Access Network Condition’s id.
ipAddrList list / elements=string	<p>This field should contain IP-address-or-subnet,port number<br> IP address can be IPV4 format (n.n.n.n) or IPV6 format (n n n n n n n n).<br> IP subnet can be IPV4 format (n.n.n.n/m) or IPV6 format (n n n n n n n n/m).<br> Line format - IP Address or subnet,Port</p>.
link dictionary	Network Access Network Condition’s link.
href string	Network Access Network Condition’s href.
rel string	Network Access Network Condition’s rel.
type string	Network Access Network Condition’s type.
macAddrList list / elements=string	<p>This field should contain Endstation MAC address, comma, and Destination MAC addresses.<br> Each Max address must include twelve hexadecimal digits using formats nn nn nn nn nn nn or nn-nn-nn-nn-nn-nn or nnnn.nnnn.nnnn or nnnnnnnnnnnn.<br> Line format - Endstation MAC,Destination MAC </p>.
name string	Network Condition name.
conditionType string	This field determines the content of the conditions field.
description string	Network Access Network Condition’s description.
id string	Network Access Network Condition’s id.
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: no ← (default) yes
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in 1.1.0 of cisco.ise	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: no yes ← (default)
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: no yes ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: “3.1.1”
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: no yes ← (default)
link dictionary	Network Access Network Condition’s link.
href string	Network Access Network Condition’s href.
rel string	Network Access Network Condition’s rel.
type string	Network Access Network Condition’s type.
name string	Network Condition name.

Notes 

Note

SDK Method used are network_access_network_conditions.NetworkAccessNetworkConditions.create_network_access_network_condition, network_access_network_conditions.NetworkAccessNetworkConditions.delete_network_access_network_condition_by_id, network_access_network_conditions.NetworkAccessNetworkConditions.update_network_access_network_condition_by_id,
Paths used are post /network-access/network-condition, delete /network-access/network-condition/{id},
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK
The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection

Examples 

- name: Create
  cisco.ise.network_access_network_condition:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    conditionType: string
    conditions:
    - cliDnisList:
      - string
      conditionType: string
      description: string
      deviceGroupList:
      - string
      deviceList:
      - string
      id: string
      ipAddrList:
      - string
      link:
        href: string
        rel: string
        type: string
      macAddrList:
      - string
      name: string
    description: string
    id: string
    link:
      href: string
      rel: string
      type: string
    name: string

- name: Update by id
  cisco.ise.network_access_network_condition:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    conditionType: string
    conditions:
    - cliDnisList:
      - string
      conditionType: string
      description: string
      deviceGroupList:
      - string
      deviceList:
      - string
      id: string
      ipAddrList:
      - string
      link:
        href: string
        rel: string
        type: string
      macAddrList:
      - string
      name: string
    description: string
    id: string
    link:
      href: string
      rel: string
      type: string
    name: string

- name: Delete by id
  cisco.ise.network_access_network_condition:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    id: string

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key

Description

ise_response

dictionary

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: “{\n \”conditionType\”: \”string\”,\n \”description\”: \”string\”,\n \”id\”: \”string\”,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”name\”: \”string\”,\n \”conditions\”: [\n {\n \”cliDnisList\”: [\n \”string\”\n ],\n \”conditionType\”: \”string\”,\n \”description\”: \”string\”,\n \”id\”: \”string\”,\n \”ipAddrList\”: [\n \”string\”\n ],\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”macAddrList\”: [\n \”string\”\n ],\n \”name\”: \”string\”,\n \”deviceGroupList\”: [\n \”string\”\n ],\n \”deviceList\”: [\n \”string\”\n ]\n }\n ]\n}\n”

ise_update_response

dictionary

added in 1.1.0 of cisco.ise

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: “{\n \”response\”: {\n \”conditionType\”: \”string\”,\n \”description\”: \”string\”,\n \”id\”: \”string\”,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”name\”: \”string\”,\n \”conditions\”: [\n {\n \”cliDnisList\”: [\n \”string\”\n ],\n \”conditionType\”: \”string\”,\n \”description\”: \”string\”,\n \”id\”: \”string\”,\n \”ipAddrList\”: [\n \”string\”\n ],\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”macAddrList\”: [\n \”string\”\n ],\n \”name\”: \”string\”,\n \”deviceGroupList\”: [\n \”string\”\n ],\n \”deviceList\”: [\n \”string\”\n ]\n }\n ]\n },\n \”version\”: \”string\”\n}\n”

Authors

Rafael Campos (@racampos)

cisco.ise.network_access_network_condition module – Resource module for Network Access Network Condition

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 