cisco.ise.sxp_local_bindings – Resource module for Sxp Local Bindings

Note

This plugin is part of the cisco.ise collection (version 2.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ise.

To use it in a playbook, specify: cisco.ise.sxp_local_bindings.

New in version 1.0.0: of cisco.ise

Synopsis

• Manage operations create, update and delete of the resource Sxp Local Bindings.

• This API creates a SXP local binding.

• This API deletes a SXP local binding.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

• ciscoisesdk >= 1.4.0

• python >= 3.5

Parameters

Parameter	Comments
bindingName string	This field is depricated from Cisco ISE 3.0.
description string	Sxp Local Bindings’s description.
id string	Sxp Local Bindings’s id.
ipAddressOrHost string	IP address for static mapping (hostname is not supported).
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: no ← (default) yes
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in 1.1.0 of cisco.ise	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: no yes ← (default)
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: no yes ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: “3.1.1”
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: no yes ← (default)
sgt string	SGT name or ID.
sxpVpn string	List of SXP Domains, separated with comma. At least one of sxpVpn or vns should be defined.
vns string	List of Virtual Networks, separated with comma. At least one of sxpVpn or vns should be defined.

Notes

Note

• SDK Method used are sxp_local_bindings.SxpLocalBindings.create_sxp_local_bindings, sxp_local_bindings.SxpLocalBindings.delete_sxp_local_bindings_by_id, sxp_local_bindings.SxpLocalBindings.update_sxp_local_bindings_by_id,

• Paths used are post /ers/config/sxplocalbindings, delete /ers/config/sxplocalbindings/{id},

• Does not support check_mode

• The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK

• The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection

Examples

- name: Update by id
  cisco.ise.sxp_local_bindings:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    bindingName: string
    description: string
    id: string
    ipAddressOrHost: string
    sgt: string
    sxpVpn: string
    vns: string

- name: Delete by id
  cisco.ise.sxp_local_bindings:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    id: string

- name: Create
  cisco.ise.sxp_local_bindings:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    bindingName: string
    description: string
    id: string
    ipAddressOrHost: string
    sgt: string
    sxpVpn: string
    vns: string

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
ise_response dictionary	A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: “{\n \”id\”: \”string\”,\n \”description\”: \”string\”,\n \”bindingName\”: \”string\”,\n \”ipAddressOrHost\”: \”string\”,\n \”sxpVpn\”: \”string\”,\n \”sgt\”: \”string\”,\n \”vns\”: \”string\”,\n \”link\”: {\n \”rel\”: \”string\”,\n \”href\”: \”string\”,\n \”type\”: \”string\”\n }\n}\n”
ise_update_response dictionary added in 1.1.0 of cisco.ise	A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: “{\n \”UpdatedFieldsList\”: {\n \”updatedField\”: [\n {\n \”field\”: \”string\”,\n \”oldValue\”: \”string\”,\n \”newValue\”: \”string\”\n }\n ],\n \”field\”: \”string\”,\n \”oldValue\”: \”string\”,\n \”newValue\”: \”string\”\n }\n}\n”

Authors

• Rafael Campos (@racampos)